Conductor 8" Work
$249.95
Color:
Hazel (Brown)
Width:
Size:
The Conductor work boot is built for hard work.
The exterior is crafted from quality leather for durability and extended wear. Its Double Comfort® System utilizes revolutionary new orthotic inserts working directly with the Orthotic Texon®/PORON® Insole to create maximum comfort on and off the job. The durable polyurethane outsole is oil and slip resisting. This meets ASTM F2892 safety footwear standards.
Details
- Upper: Full Grain Leather
- Lining: Woven
- Insole: Double comfort® w/ Orthotic Insert
- Toe Shape: Round
- Construction: Sewn Seat
- Shank: Non-Metallic
- Outsole: Oil and Slip Resisting Polyurethane
- Safety Features: ASTM F2892 rated, oil and slip resisting.
Slip Resisting - Designed with heavy-duty outsoles that influence the grip of the boot when walking on wet surfaces.
Electric Hazard - Our electrical hazard rated boots protect you from open electrical currents from the bottom up. Tested up to 18,000 volts.
Made in the USA with Global Parts - Proudly made in the USA with global parts, our USA-Made boots are crafted by hand by the talented bootmakers at our El Paso, Texas factory.
Cowhide on a Western Boot - Non-waterproof
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply a leather conditioning cream to all exterior leather areas on the boot.
Work boots – Waterproof
- If the boot has laces, remove the laces.
- Rinse or hose down only the exterior of the boots to remove debris.
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the exterior of the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply leather conditioning cream to all exterior leather areas on the boot.
Suede
- Let the debris dry on the boots.
- Carefully use a semi-stiff brush to knock off debris from the boot.
- Dust off the remaining debris.
- Use a warm washcloth to dab off and clean the boot.
Exotics
- Ostrich Leather - Use a soft, damp washcloth to softly wipe down exotic leather. Then lightly apply a thin layer of exotic leather conditioner after cleaning. Ostrich leather can be extremely sensitive to oils – make sure you apply conditioner to a small area first prior to applying to the entire boots.
- Reptile Leather - Use a soft brush to gently wipe down the exotic leather. Once clean, liberally apply an exotic leather cream.
- Fish Leather - gently brush the surface of your boot removing dirt and debris. Then lightly apply an exotic leather conditioner to your boot.
- Shark Leather - one of the most durable leathers available on a boot, you will first want to spot clean this shark leather with a damp cloth. For stains, use a cleaner specifically designed for exotic leathers or a mild soap mixture to carefully remove the imperfection. Once cleaned, liberally apply an exotic conditioner.
- Stingray Leather - to clean, use a soft, barely dampened cloth to gently wipe off the stingray leather. Then delicately apply a premium exotic leather conditioner after thoroughly cleaned.
- Elephant Leather - use a soft brush or towel to remove dust, dirt and debris.
Then lightly apply a leather conditioner exclusive made for exotic leathers.
It is important to remember your cowboy boots should be cleaned and conditioned on a regular basis, especially if you wear them often.
Visit our Boot Care page for more in-depth advice and instructions.
Cowhide on a Western Boot - Non-waterproof
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply a leather conditioning cream to all exterior leather areas on the boot.
Work boots – Waterproof
- If the boot has laces, remove the laces.
- Rinse or hose down only the exterior of the boots to remove debris.
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the exterior of the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply leather conditioning cream to all exterior leather areas on the boot.
Suede
- Let the debris dry on the boots.
- Carefully use a semi-stiff brush to knock off debris from the boot.
- Dust off the remaining debris.
- Use a warm washcloth to dab off and clean the boot.
Exotics
- Ostrich Leather - Use a soft, damp washcloth to softly wipe down exotic leather. Then lightly apply a thin layer of exotic leather conditioner after cleaning. Ostrich leather can be extremely sensitive to oils – make sure you apply conditioner to a small area first prior to applying to the entire boots.
- Reptile Leather - Use a soft brush to gently wipe down the exotic leather. Once clean, liberally apply an exotic leather cream.
- Fish Leather - gently brush the surface of your boot removing dirt and debris. Then lightly apply an exotic leather conditioner to your boot.
- Shark Leather - one of the most durable leathers available on a boot, you will first want to spot clean this shark leather with a damp cloth. For stains, use a cleaner specifically designed for exotic leathers or a mild soap mixture to carefully remove the imperfection. Once cleaned, liberally apply an exotic conditioner.
- Stingray Leather - to clean, use a soft, barely dampened cloth to gently wipe off the stingray leather. Then delicately apply a premium exotic leather conditioner after thoroughly cleaned.
- Elephant Leather - use a soft brush or towel to remove dust, dirt and debris.
Then lightly apply a leather conditioner exclusive made for exotic leathers.
It is important to remember your cowboy boots should be cleaned and conditioned on a regular basis, especially if you wear them often.
Visit our Boot Care page for more in-depth advice and instructions.