Joist 11" Waterproof Comp Toe
$199.95
Color:
Chocolate (Brown)
Width:
Size:
The Joist Waterproof Composite Toe 11" tall Men's Hybred® work boot is built for durability.
The leather exterior is waterproof and accented by a simple stitch pattern along the upper. This boot features layers of comfort with a J-Flex Flexible Comfort System® insole, the Justin Stabilization Technology®, Ortholite® Comfort Foam insole, and a Dri-Lex® cover. The composite toe provides security and comfort and meets safety standards without weighing you down. Its multi-density rubber and EVA combination outsole offers lightweight durability and meets the standards for electrical hazard footwear so you are guaranteed protection against open circuits of up to 18,000 volts. This boot also provides an Achilles Relief System® that eliminates weak spots in foot comfort by using stretchable material, high-density foam, and moisture-wicking anti-microbial lining to provide flexibility, support and breathability.
- Upper: Premium Full Grain Leather
- Lining: Woven
- Insole: Ortholite®Removable Insert
- Toe Shape: Square
- Construction: Cement
- Outsole: Rubber
- Safety Features: EH, Waterproof, Composite Toe, Oil and Slip Resisting, ASTM F2413 rated
J-Flex® - Our J-Flex Flexible Comfort System® will keep you at ease with covered cushioned insole and triple density insole board, creating the most comfortable boots you’ll ever own.
Ortholite® - Our Ortholite® inserts are made in open-cell polyurethane foam, which is extremely breathable, lightweight, and flexible. Built to retain 95% of their original thickness and to prevent flattening over time, our Ortholite® inserts have anti-bacterial properties and can be easily removed, washed, and replaced.
Justin Stabilization Technology® - Our Justin Stabilization Technology® uses dual density memory foam to stabilize the foot while still allowing it to move as needed.
Dri-Lex® - Dri-Lex® is an abrasion resistant fabric that moves moisture away from the foot. This fabric works in tandem with a layer of spacer mesh which allows air to circulate and dry the foot by moving moisture to the outer layer.
Electric Hazard - Our electrical hazard rated boots protect you from open electrical currents from the bottom up. Tested up to 18,000 volts.
Waterproof - We use only the best construction and components to create waterproof boots that keep your feet dry no matter the conditions.
Composite Toe - Our composite safety toe provides security and comfort against impact, compression and electrical hazard at a fraction of the weight.
Cowhide on a Western Boot - Non-waterproof
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply a leather conditioning cream to all exterior leather areas on the boot.
Work boots – Waterproof
- If the boot has laces, remove the laces.
- Rinse or hose down only the exterior of the boots to remove debris.
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the exterior of the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply leather conditioning cream to all exterior leather areas on the boot.
Suede
- Let the debris dry on the boots.
- Carefully use a semi-stiff brush to knock off debris from the boot.
- Dust off the remaining debris.
- Use a warm washcloth to dab off and clean the boot.
Exotics
- Ostrich Leather - Use a soft, damp washcloth to softly wipe down exotic leather. Then lightly apply a thin layer of exotic leather conditioner after cleaning. Ostrich leather can be extremely sensitive to oils – make sure you apply conditioner to a small area first prior to applying to the entire boots.
- Reptile Leather - Use a soft brush to gently wipe down the exotic leather. Once clean, liberally apply an exotic leather cream.
- Fish Leather - gently brush the surface of your boot removing dirt and debris. Then lightly apply an exotic leather conditioner to your boot.
- Shark Leather - one of the most durable leathers available on a boot, you will first want to spot clean this shark leather with a damp cloth. For stains, use a cleaner specifically designed for exotic leathers or a mild soap mixture to carefully remove the imperfection. Once cleaned, liberally apply an exotic conditioner.
- Stingray Leather - to clean, use a soft, barely dampened cloth to gently wipe off the stingray leather. Then delicately apply a premium exotic leather conditioner after thoroughly cleaned.
- Elephant Leather - use a soft brush or towel to remove dust, dirt and debris.
Then lightly apply a leather conditioner exclusive made for exotic leathers.
It is important to remember your cowboy boots should be cleaned and conditioned on a regular basis, especially if you wear them often.
Visit our Boot Care page for more in-depth advice and instructions.
Cowhide on a Western Boot - Non-waterproof
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply a leather conditioning cream to all exterior leather areas on the boot.
Work boots – Waterproof
- If the boot has laces, remove the laces.
- Rinse or hose down only the exterior of the boots to remove debris.
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the exterior of the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply leather conditioning cream to all exterior leather areas on the boot.
Suede
- Let the debris dry on the boots.
- Carefully use a semi-stiff brush to knock off debris from the boot.
- Dust off the remaining debris.
- Use a warm washcloth to dab off and clean the boot.
Exotics
- Ostrich Leather - Use a soft, damp washcloth to softly wipe down exotic leather. Then lightly apply a thin layer of exotic leather conditioner after cleaning. Ostrich leather can be extremely sensitive to oils – make sure you apply conditioner to a small area first prior to applying to the entire boots.
- Reptile Leather - Use a soft brush to gently wipe down the exotic leather. Once clean, liberally apply an exotic leather cream.
- Fish Leather - gently brush the surface of your boot removing dirt and debris. Then lightly apply an exotic leather conditioner to your boot.
- Shark Leather - one of the most durable leathers available on a boot, you will first want to spot clean this shark leather with a damp cloth. For stains, use a cleaner specifically designed for exotic leathers or a mild soap mixture to carefully remove the imperfection. Once cleaned, liberally apply an exotic conditioner.
- Stingray Leather - to clean, use a soft, barely dampened cloth to gently wipe off the stingray leather. Then delicately apply a premium exotic leather conditioner after thoroughly cleaned.
- Elephant Leather - use a soft brush or towel to remove dust, dirt and debris.
Then lightly apply a leather conditioner exclusive made for exotic leathers.
It is important to remember your cowboy boots should be cleaned and conditioned on a regular basis, especially if you wear them often.
Visit our Boot Care page for more in-depth advice and instructions.