Rush 11" Steel Toe Waterproof Work Boot
$194.95
Color:
Saddle Tan (Tan)
Width:
Size:
Up for anything, with the rugged performance and protection you need. The 11" Stampede Rush Steel Toe boot features a steel toe so you can get out there and get it done with confidence.
It's equipped with a flexible and durable oil-and slip-resistant rubber outsole for the traction you need for work and play. Inside, the Ortholite® Dual Density insole supports your feet in comfort while the egg-crate insert helps to promote air movement. This Electrical Hazard Rated boot meets ASTM F2892-11 EH Standards.
- Material: Cowhide
- Toe Shape: Square
- Heel: Walking/Block
- Outsole: Non-Leather
Electric Hazard - Our electrical hazard rated boots protect you from open electrical currents from the bottom up. Tested up to 18,000 volts.
Waterproof - We use only the best construction and components to create waterproof boots that keep your feet dry no matter the conditions.
Steel Toe - From the ranch to the construction site, our steel toe boots are the ideal solution for the working man and woman meeting industry standards for impact and compression.
Slip Resisting - Designed with heavy-duty outsoles that influence the grip of the boot when walking on wet surfaces.
Cowhide on a Western Boot - Non-waterproof
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply a leather conditioning cream to all exterior leather areas on the boot.
Work boots – Waterproof
- If the boot has laces, remove the laces.
- Rinse or hose down only the exterior of the boots to remove debris.
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the exterior of the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply leather conditioning cream to all exterior leather areas on the boot.
Suede
- Let the debris dry on the boots.
- Carefully use a semi-stiff brush to knock off debris from the boot.
- Dust off the remaining debris.
- Use a warm washcloth to dab off and clean the boot.
Exotics
- Ostrich Leather - Use a soft, damp washcloth to softly wipe down exotic leather. Then lightly apply a thin layer of exotic leather conditioner after cleaning. Ostrich leather can be extremely sensitive to oils – make sure you apply conditioner to a small area first prior to applying to the entire boots.
- Reptile Leather - Use a soft brush to gently wipe down the exotic leather. Once clean, liberally apply an exotic leather cream.
- Fish Leather - gently brush the surface of your boot removing dirt and debris. Then lightly apply an exotic leather conditioner to your boot.
- Shark Leather - one of the most durable leathers available on a boot, you will first want to spot clean this shark leather with a damp cloth. For stains, use a cleaner specifically designed for exotic leathers or a mild soap mixture to carefully remove the imperfection. Once cleaned, liberally apply an exotic conditioner.
- Stingray Leather - to clean, use a soft, barely dampened cloth to gently wipe off the stingray leather. Then delicately apply a premium exotic leather conditioner after thoroughly cleaned.
- Elephant Leather - use a soft brush or towel to remove dust, dirt and debris.
Then lightly apply a leather conditioner exclusive made for exotic leathers.
It is important to remember your cowboy boots should be cleaned and conditioned on a regular basis, especially if you wear them often.
Visit our Boot Care page for more in-depth advice and instructions.
Cowhide on a Western Boot - Non-waterproof
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply a leather conditioning cream to all exterior leather areas on the boot.
Work boots – Waterproof
- If the boot has laces, remove the laces.
- Rinse or hose down only the exterior of the boots to remove debris.
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the exterior of the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply leather conditioning cream to all exterior leather areas on the boot.
Suede
- Let the debris dry on the boots.
- Carefully use a semi-stiff brush to knock off debris from the boot.
- Dust off the remaining debris.
- Use a warm washcloth to dab off and clean the boot.
Exotics
- Ostrich Leather - Use a soft, damp washcloth to softly wipe down exotic leather. Then lightly apply a thin layer of exotic leather conditioner after cleaning. Ostrich leather can be extremely sensitive to oils – make sure you apply conditioner to a small area first prior to applying to the entire boots.
- Reptile Leather - Use a soft brush to gently wipe down the exotic leather. Once clean, liberally apply an exotic leather cream.
- Fish Leather - gently brush the surface of your boot removing dirt and debris. Then lightly apply an exotic leather conditioner to your boot.
- Shark Leather - one of the most durable leathers available on a boot, you will first want to spot clean this shark leather with a damp cloth. For stains, use a cleaner specifically designed for exotic leathers or a mild soap mixture to carefully remove the imperfection. Once cleaned, liberally apply an exotic conditioner.
- Stingray Leather - to clean, use a soft, barely dampened cloth to gently wipe off the stingray leather. Then delicately apply a premium exotic leather conditioner after thoroughly cleaned.
- Elephant Leather - use a soft brush or towel to remove dust, dirt and debris.
Then lightly apply a leather conditioner exclusive made for exotic leathers.
It is important to remember your cowboy boots should be cleaned and conditioned on a regular basis, especially if you wear them often.
Visit our Boot Care page for more in-depth advice and instructions.